Archive | 2 plus 1 fin

Greco Soft Surfboards

Greco Soft Surfboards

Dimensions
8′ x 22 ½” x 3 ¼”
Materials
IXPE deck with 10 lb. density for extra strength
EPS core for durability
HDPE bottom
New heat laminated sealing system, no glue was used
Fins
3 Polyurethane fins
2 + 1 simulation set up
Stringers
3 solid treated stringers
Resists water logging and warping

If you have ridden one of these write your review below

Posted in 2 plus 1 fin, All Surfboard Shapers, Greco, Longboard, Single Fin0 Comments

Walden Magic Model

Walden Magic Model

The Magic Model is one of the most sophisticated longboards ever designed. Originally built in 1981, the magic model was years ahead of its time and has become the prototype of the modern longboard.

The Magic Model has been tested and improved for over twenty years and today its performance is unmatched. The magic model is a great nose riding board, this is your all around performance longboard, just as fun in small surf as it is in larger waves.

The Magic Model is designed with a concave nose flowing to the middle of the board that transitions into double concave hulls extending to the tail with a moderate “V”. Rails are hard in the rear and soften to the nose to maintain responsiveness in all conditions. Although the rails tend to be harder than most other longboards, the unique bottom curve and beveled rails keep them from catching like most other hard rail boards.

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Nose Rider, Squash, Walden Surfboards4 Comments

Robert August Saber Model

Robert August Saber Model

This design comes with low-egg rails which taper back to an edge at the diamond-tail. A slight rail-to-rail concave under the nose incorporated with an overall flat bottom give this model some high performance capabilities to go along with its abundant nose riding qualities

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Robert August, Square Tails0 Comments

Martinson Predator Model

Martinson Predator Model

In the 60’s, shapers used stepdecks as a means of decreasing weight and volume, thus increasing a surfboard’s performance potential. The Predator design, expertly conceived and executed by Mark Martinson, revisits this concept within the context of 21st Century long board surfing.

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Robert August1 Comment

Pearson Arrow Teardrop Model

Pearson Arrow Teardrop Model

9’6″ Teardrop Model

Nose: 19″
Width: 22 1/2″
Tail: 14″
Thickness: 3″

Glass:
Top = 2 – 6oz
Bottom = 1 – 6oz

Fin System:
Center fin box w/
FCS side fins

This board is one of our most popular longboards. It is a great all around surfboard. A perfect compromise between a noserider and a performance board. A slight concave helps trim the board when you are on the nose, while the slightly pulled in tail, tri-fin set up harder rails allow the board to perform from the tail.

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Pearson Arrow, Pin Tail / Rounded Pin0 Comments

Pearson Arrow Tanner Beckett Model

Pearson Arrow Tanner Beckett Model

9’0″ Tanner Beckett
High Performance

Nose: 18″
Width: 22″
Tail: 12 1/2″
Thickness: 2 3/4″

Glass:
Top = 1 – 6oz/1 – 4oz
Bottom = 1 – 6oz

Fin System: 10″ Center fin box w/ FCS side fins

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Pearson Arrow, Pin Tail / Rounded Pin0 Comments