Archive | Pin Tail / Rounded Pin

Surfboards by Davenport -California Classic

Surfboards by Davenport -California Classic

A classic pintail with glide and superior noseriding capabilities. This board has low nose rocker for steering from the tip and a long drawn out middle with a kicked up tail for cutting back. The rails have a lip in the front to 50/50 pinched in the middle to a turned up roll in the back to help rotation, smooth out the turns and enhance the glide.

Length: 9’4” – 10’ 6”
Nose: 17” – 18 5/8”
Width: 22” – 23 5/8”
Tail: 14“ – 15 1/2”
Thickness: 3 1/8” – 3 3/8”

Info by EdFactor

Posted in All Surfboard Shapers, Longboard, Pin Tail / Rounded Pin, Single Fin, surfboards by davenport0 Comments

Walden Magic 3 Model

Walden Magic 3 Model

The Magic Model 3 is basically the same board as the magic model, but with a more exxagerated design and an emphasis on maximum speed and maneuverability. The Magic 3 has a wider concave nose merging into the famous magic double concave tail. The rocker on the bottom curve is slightly flatter for even more speed and planning..Developed for maximum speed on a lined up wave, nothing goes faster.

The magic Model 3 is for the better surfer and the surfer who rides bigger waves.

Size Range 8-11′

Available in 3phase epoxy in size 9’0 only

Posted in All Surfboard Shapers, Longboard, Pin Tail / Rounded Pin, Walden Surfboards0 Comments

Tyler Point Model

Tyler Point Model

Point Model:
9’4″ to 10’0″
Thickness 3 1/8″
Nose 18″
Width 22 7/8″
Tail 15 1/8″
Triple Stringer T-Band
Glassing 6x10oz Volan Deck, 10oz Volan Bottom

This model has no concave to interfere with smooth trim. Designed for California style point breaks; outline resembles the Tyler Noserider Model. Allow for clean tracking on the nose, while the pintail configuration enhances hip curve for ease of turning with minimal skid.

Posted in All Surfboard Shapers, Longboard, Pin Tail / Rounded Pin, Tyler Surfboards0 Comments

Pearson Arrow Teardrop Model

Pearson Arrow Teardrop Model

9’6″ Teardrop Model

Nose: 19″
Width: 22 1/2″
Tail: 14″
Thickness: 3″

Glass:
Top = 2 – 6oz
Bottom = 1 – 6oz

Fin System:
Center fin box w/
FCS side fins

This board is one of our most popular longboards. It is a great all around surfboard. A perfect compromise between a noserider and a performance board. A slight concave helps trim the board when you are on the nose, while the slightly pulled in tail, tri-fin set up harder rails allow the board to perform from the tail.

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Pearson Arrow, Pin Tail / Rounded Pin0 Comments

Pearson Arrow Tanner Beckett Model

Pearson Arrow Tanner Beckett Model

9’0″ Tanner Beckett
High Performance

Nose: 18″
Width: 22″
Tail: 12 1/2″
Thickness: 2 3/4″

Glass:
Top = 1 – 6oz/1 – 4oz
Bottom = 1 – 6oz

Fin System: 10″ Center fin box w/ FCS side fins

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Pearson Arrow, Pin Tail / Rounded Pin0 Comments

JC Hawaii Flo-Master

JC Hawaii Flo-Master

The Flo-Master combines the most radical contemporary design concepts with the best characteristics of the old school boards. This board paddles amazing, turns on a dime, and is stable enough for you to hang out on the nose long enough for your friends to secretly envy you.

ABILITY LEVEL: For the Beginner to the Advanced surfer.

WAVE TYPE: Works in just about anything from knee to head high.

Posted in 2 plus 1 fin, All Surfboard Shapers, JC Hawaii, Longboard, Pin Tail / Rounded Pin0 Comments