Archive | Square Tails

Walden Stealth-Geometric

Walden Stealth-Geometric

The Stealth-Geometric is another Steve Walden Original design, inspired by the angular stealth bomber…the outline, rails and bottom countour are facetted with angles rather than curves. The center concave combined with hard angles make the board fast by producing lift. This board combines the speed and agility of a performance surfboard with the trim speed of a traditonal board.. also a great noserider. The purpose of the board is to achieve defined water flow..meaning maximum lift, responsivness and speed. Designed for the intermediate or better surfer in small to medium sized surf.

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Square Tails, Walden Surfboards0 Comments

Tyler Wingnose Model

Tyler Wingnose Model

Wingnose Model:
9’6″ to 9’10″
Nose 17 1/2″
Width 23 1/4″
Square Tail 15″
Thickness just over 3″
Glass 6x10oz volan deck, 10oz bottom.

This is a hot model with special down rail nose for speed and versatility in any size surf. The rocker is very, very kicked in the tail and flat nose. With a 50/50 rail up to the down rail in the nose. Team riders most preferred travel board.

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Square Tails, Tyler Surfboards0 Comments

Tyler Noserider

Tyler Noserider

This is a more advanced traditional board for point breaks and small beach breaks. This is the shape dedicated solely for the traditional noseriding surfer. This board is designed to be the best noserider afloat, hands down. The Tyler Noserider incorporates a wide nose that has a four foot tear drop concave bottom for maximum lift. The rails taper back from the nose, moving the trim point to the front one third of the board. The concave area generates the amount of lift and stall necessary to keep the surfer right in the curl. The blade like 50/50 rails instrumental in keeping the board from sliding down the face of the wave while the surfer is on the nose. The large, deep glass on fin is also critical in keeping a straight, true line while on the nose. The fin is also designed by Tyler

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Square Tails, Tyler Surfboards0 Comments

Tyler Sleek Zeke Model

Tyler Sleek Zeke Model

9’6″ to 10’0″ Thickness 3 1/8″ to 3 5/16″ Nose 19″ Width 23 1/4″ Square Tail 16″ Stringer Two 1/4″ Redwoods one inch apart Foam Density is Super Green Glassing 6x10oz Volan Deck, 10oz Volan Bottom This is a mid range ability board for all around surf from one foot to ten feet. The basic theory behind this model is a sixties style board with speed and turning potential and surprising maneuverability. The outline is that of a parallel rail board, wide and thin. The most outstanding feature is the thinner kicked nose. This allows for later drops and less water catching surface during turns

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Square Tails, Tyler Surfboards0 Comments

Robert August Saber Model

Robert August Saber Model

This design comes with low-egg rails which taper back to an edge at the diamond-tail. A slight rail-to-rail concave under the nose incorporated with an overall flat bottom give this model some high performance capabilities to go along with its abundant nose riding qualities

Posted in 2 plus 1 fin, All Surfboard Shapers, Longboard, Robert August, Square Tails0 Comments

Mark Martinson Model

Mark Martinson Model

Proven design concepts from the classic nose riding models of the 60′s blended with current surfboard design and production methodologies, results in a one-of-a-kind, classic. The wide nose utilizing a flat planning surface underneath, provides for the longest, tightest nose rides possible. Modern tail-rocker, light weight, and a custom single fin, allow this model to rip in any conditions.

Posted in All Surfboard Shapers, Longboard, Robert August, Single Fin, Square Tails2 Comments