Archive | Dano Kustom Surfboards

Dano The Thing – Mini Simmons

Dano The Thing – Mini Simmons

These boards are built in homage to the one of the fathers of the foam surfboard Bob Simmons. The original back in the late 40′s where 10′ plus and weighed a ton. Today these boards are under 6′and are built light and fast. They have a hull bellied bottom and glassed in plywood fins or boxes if you choose. This board gets up and goes! One of the fastest boards you will ever ride!

Posted in All Surfboard Shapers, Dano Kustom Surfboards0 Comments

Dano “Hog” Model

Dano “Hog” Model

The Hog model is built from 9’0″ and up typical dimensions are 17″ nose x 22″ wide 16″ tail and 3.25″ thick. Comes in square or round tail. Comes with a wood or fiberglass glassed in fin. Shaped with traditional surfing in mind. All dimensions are custom shaped feel free to change any part of shape.

Posted in All Surfboard Shapers, Dano Kustom Surfboards0 Comments

Dano Pignar Breadbasket

Dano Pignar Breadbasket

The Pignar Breadbasket is a very traditional style longboard for traditional surfing. The board is “Pig” with the hips set back and a narrow 16″ nose. The board comes with a custom D-Fin glassed in and a heavy glass job and ultra cool resin job. Good for a surfer who is looking for a nice log. And you will be surprised that this board comes alive in waves with some juice. Typical dimensions are 9’9″ long x 23″ wide x 16″ tail and about 3.25″ thick

Posted in All Surfboard Shapers, Dano Kustom Surfboards0 Comments

Dano Los Creeper

Dano Los Creeper

The Los Creeper is a double step deck. The front of the board has a step down on the first 3rd of the board. And there is a small step in the tail of the board. These steps are on the top of the board and the bottom is left smooth with no concaves for fast and easy wave catching and riding.

The front step on the board are designed to reduce the swing weight of the front of the board and for the board to acutally straighten when the rider is on the nose for enhanced and longer nose rides.

The rear step is designed for so the wave will easily bury the tail and give the board more nose lift also enhancing the ride on the nose.

The board is typically built with volan glass and two 1/4″ redwood stringers 1/2″ apart. The rails are 50/50 and the comes with a large raked glassed in fin to hold the board for long nose rides.

Posted in All Surfboard Shapers, Dano Kustom Surfboards0 Comments

Dano The Nose Glider

Dano The Nose Glider

“The Nose Glide is available for 8.0″” and up, 18.5″” x 23″” 16′ x 3″” are the typical dimensions.This board is build with traditional surfing in mind. Volan glass, round or square tail, glassed in or fin box available. All boards are hand shaped so feel free to customize your dimensions, stringers, and set up.

Posted in All Surfboard Shapers, Dano Kustom Surfboards0 Comments

Dano The Nose Glider

Dano The Nose Glider

“The Nose Glide is available for 8.0″” and up, 18.5″” x 23″” 16′ x 3″” are the typical dimensions.This board is build with traditional surfing in mind. Volan glass, round or square tail, glassed in or fin box available. All boards are hand shaped so feel free to customize your dimensions, stringers, and set up.

Posted in Dano Kustom Surfboards, Longboard, Nose Rider, Single Fin0 Comments