Archive | Jim Phillips

Phillips Da Copy Cat

Phillips Da Copy Cat

The outline of the board is pure 60’s with a pulled in nose and hips back of center. The board features 50/50 rails from nose to tail with the famous long step/hump deck accented by a slight chine to the deck rail. The bottom contours are very simple giving this board nice drive and projection out of turns and a clean trim spot about center. Go clean, clear volan or throw some pigment on it – either way grab your trunks and a bar of wax.

-Materials: US Blanks or Blair Polyurethane Foam.

-Stringer Configuration: 3/8” cedar is standard

-Fin: Malibu Classic if you’d like or Miss Lucy

Posted in All Surfboard Shapers, Jim Phillips0 Comments

Phillips – Van Velzer aka The Pig

Phillips – Van Velzer aka The Pig

Simmons made ‘em light, Velzy made ‘em turn…and Phillips made ‘em relevant. This model defines the boards of the late 50’s / early 60’s – before noses widened and signature models were introduced. A pulled in nose and soft rounded squaretail, with hips about 10” behind center, are the marks of what Dale Velzy designed as The Pig. The rails start slightly up in the nose, where there’s a bit of belly, and then they smoothly transition to 50/50, which works with the slight body roll all the way through the tail. Just ahead of the fin on the bottom we’ve added some additional roll to allow the board to rotate and bank stylishly side-to-side. The board gets a glass on fin but we don’t put it right back on the tail because there’s no need…we like it about 4” up from the tail, just so the trailing edge of the fin lines up with the tail block. This placement, along with the fin shape, allows you to really open her up on the face. The Pig is one of the most user-friendly boards you can own. Baggy trunks and whip turns…waaa hooooooooo!

-Materials: US Blanks or Blair Polyurethane Foam.

-Stringer Configuration: A true 1” redwood (no puny 7/8” sticks here) or wide balsa…2”, 3” or…..?

-Fin: Glass on pig fin or skeg of your choice

Posted in All Surfboard Shapers, Jim Phillips, Longboard, Pig, Single Fin0 Comments