Archive | surfboards by davenport

Surfboards by Davenport – On the Rocks Model

Surfboards by Davenport – On the Rocks Model

Conceived on the barstools of the legendary Harbor Room by Mr. Davenport and Mr. Factor after one too many stiff whiskey cannonballs, straight no chaser, the “On the Rocks” model should not be confused with the marketing scheme surrounding the nomenclature “Log.” “Logs” are for lumberjacks, limp wristed cutbacks, ballerina slow motion tip toes, and kiddie park rollercoasters for junior. No baseball bat rails or silly trendy dug-out canoe concave, yet it can noseride…just not in the shoulder. So, forget any “just the tip” action on the flats. Frontal action is a functional maneuver and not a donkey-show pony-trick. With rails so slippery in the water and the slide so quick, no lube is necessary. A beer gut-belly in the center of the board proves that the “On the Rocks” model leaves the light beers for the ladies. Yet, the thin foil may suggest that the “On the Rocks” model might also have added a third pun to it’s namesake. With the ability to be a casual cat and the critical sections, gouging cutbacks, back-breaking jives, el rollos, halting kick stalls, deep turkey-stuffed noserides and heavy enough to scare hipsters back to their hulls, the “On the Rocks” just might be the perfect concoction for you! Bring some CLASS back to the Beach and tip the bartender.
Length: 9’0” – 10’ 6”
Nose: 16 1/2” – 18”
Width: 22” – 23 1/2”
Tail: 15 3/4“ – 16 1/2”
Thickness: 3” – 3 3/8”

Info supplied by Edfactor

On the Rocks

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, surfboards by davenport1 Comment

Surfboards by Davenport – The Thing

Surfboards by Davenport – The Thing

A board like nothing in the line up today. A wide body pig templated small wave noserider. This board features a flat nose with a kicked up tail. The nose has a lip for lift, 50/50 pinched middle rails for nose riding, and a 60/40 up turned railed V tail.

Length: 9’ 8” – 10’ 6”
Nose: 18 1/4” – 19 1/4”
Width: 23 1/2” – 24 1/4”
Tail: 17 1/4”
Tail Block: 10“
Thickness: 3 1/8” – 3 3/8”

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, surfboards by davenport1 Comment

Surfboards by Davenport – The Pig

Surfboards by Davenport – The Pig

An authentic early 60’s pig, with full hips, narrow nose, and medium tail width. The pig has neutral 50/50 rails all the way around with long clean rocker with some tail kick. Super long noserides, nasty drop knee cut backs, and loads of style come standard with this model.

Length: 9’ – 10’ 6”
Nose: 15 1/2” – 17”
Width: 21 1/2” – 23”
Tail: 15 1/2” – 16 1/2”
Thickness: 3 1/8” – 3 3/8”

Info supplied by Edfactor

Davenport Pig

Write your review below

Posted in All Surfboard Shapers, Longboard, Pig, Single Fin, surfboards by davenport0 Comments

Surfboards by Davenport model El Cadejo

Surfboards by Davenport model El Cadejo

The “El Cadjeo” is simply the deadliest noserider in the line up. A pure and classic noserider designed to whip turns for walking the board and hanging ten….It’s that simple. It’s that smooth. Consider yourself warrned!

Length: 9’4” – 10’6”
Nose: 17’ 3/4” – 18 5/8”
Width: 22 7/8” – 23 5/8”
Tail: 16” – 16 3/4”
Thickness: 3” – 3 3/8”

Info supplied by Edfactor

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, surfboards by davenport0 Comments

Surfboards by Davenport mode 4065

Surfboards by Davenport mode 4065

If there were an El Camino of surfboards this would be it. A solid
classic with clean semi-parallel template and a rolled bottom to tail
with some blended concave in the nose. The rocker is flat in the
middle for speed with a kick in the tail for whippy turns.

Length: 9’ 4” – 10’ 6”
Nose: 18“ – 19”
Width: 23” – 24”
Tail: 16” – 17”
Thickness: 3 1/8” – 3 3/8”

info by Edfactor

If you have ridden this board write a review below

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, surfboards by davenport1 Comment

Surfboards by Davenport -California Classic

Surfboards by Davenport -California Classic

A classic pintail with glide and superior noseriding capabilities. This board has low nose rocker for steering from the tip and a long drawn out middle with a kicked up tail for cutting back. The rails have a lip in the front to 50/50 pinched in the middle to a turned up roll in the back to help rotation, smooth out the turns and enhance the glide.

Length: 9’4” – 10’ 6”
Nose: 17” – 18 5/8”
Width: 22” – 23 5/8”
Tail: 14“ – 15 1/2”
Thickness: 3 1/8” – 3 3/8”

Info by EdFactor

Posted in All Surfboard Shapers, Longboard, Pin Tail / Rounded Pin, Single Fin, surfboards by davenport0 Comments