Archive | Tyler Surfboards

Tyler Deuce Model

Tyler Deuce Model

Deuce Model:
5’6″ to 6’0″
Thickness 2 5/8″
Nose 17″
Width 21 3/8″
Tail 17 1/2″
12″ tip to tip swallow tail with twin keel fin glass on (Tyler’s own
temp).
Glassed with 4oz bottom and 6x4oz deck.

This is a traditional fish in every sense. The width and thickness make up for the short length. This board does not need to be built over 6’0″. Every surfer short or longboarder should have this model in his or her quiver. Unlimited speed, trim and maneuverability equals fun in all conditions. Also a great traveling board.

Posted in All Surfboard Shapers, Fishes, Twin Fin, Tyler Surfboards0 Comments

Tyler Mini Zeke

Tyler Mini Zeke

New Model: Mini Zeke 8’4″ – 9’0″ Lenth 18 3/4″ Nose 23″ Width 16″ Tail 2 5/8″ Thickness This is a mini longboard with a rounded pin tail flat tail with nose kick and slight down rail in the tail, but 50/50 traditional rails. Fun “sand bar” style, fun trimmer and noserider.

Posted in All Surfboard Shapers, Egg, Mid-Length, Single Fin, Tyler Surfboards1 Comment

Tyler Wingnose Model

Tyler Wingnose Model

Wingnose Model:
9’6″ to 9’10″
Nose 17 1/2″
Width 23 1/4″
Square Tail 15″
Thickness just over 3″
Glass 6x10oz volan deck, 10oz bottom.

This is a hot model with special down rail nose for speed and versatility in any size surf. The rocker is very, very kicked in the tail and flat nose. With a 50/50 rail up to the down rail in the nose. Team riders most preferred travel board.

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Square Tails, Tyler Surfboards0 Comments

Tyler Riddler Model

Tyler Riddler Model

Riddler Model:
9’6″ 9’9″ and 10’0″
9’9″ dims are as follows
Nose 18 1/2″
Width 23 1/2″
Tail 16 1/4″

The Riddler has a square nose 7 1/2″ flat. The tail is also square 6″ flat.The board also has a soft stinger wing, 6 foot bottom concave and 3 foot step tail. It’s glassed with 6x10oz volan deck and 6x10oz volan bottom. The question mark resin design is standard on the deck.

The Riddler was designed to blow minds at the Oceanside Noseriding Contest and did, with crazy looks and mind-bending nose rides.People who ride this model rave about its turning ability. This is a unique original board, which is highly specialized and very time consuming to build.

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Tyler Surfboards1 Comment

Tyler Point Model

Tyler Point Model

Point Model:
9’4″ to 10’0″
Thickness 3 1/8″
Nose 18″
Width 22 7/8″
Tail 15 1/8″
Triple Stringer T-Band
Glassing 6x10oz Volan Deck, 10oz Volan Bottom

This model has no concave to interfere with smooth trim. Designed for California style point breaks; outline resembles the Tyler Noserider Model. Allow for clean tracking on the nose, while the pintail configuration enhances hip curve for ease of turning with minimal skid.

Posted in All Surfboard Shapers, Longboard, Pin Tail / Rounded Pin, Tyler Surfboards0 Comments

Tyler 305 Model

Tyler 305 Model

305 Model:
9’2″ to 10’0″
Nose 19 1/4″
Width 23 1/2″
Tail 16″
Thickness 3 1/8″ (on the 9’6″)
Soft 50/50 rails and slight nose concave
Stringer 5/16″ Bass single
Glassing 6x10oz Volan Deck, 10oz Volan Bottom
Foam is Super Blue for more buoyancy.

The 305 Model is the new millennium Zeke, designed by Tyler and his father. It has a slight concave and flatter nose to enhance noseriding and slight tail rocker to improve turns.

Posted in All Surfboard Shapers, Longboard, Nose Rider, Single Fin, Squash, Tyler Surfboards0 Comments